可能有人不解，切菜機的系數是什么？主要設計在于自動斷電保護裝置，也就是說，機器在操作過程中，如果發生以外情況，例如工人非法在工作狀態下，打開切刀防護門，這時機器就會自動停止工作。下面
大型切菜機廠家來為您講講。
Someone may wonder, what is the safety factor of the vegetable cutter? The main design is the automatic power-off protection device, that is, in the process of machine operation, if an external situation occurs, such as the workers illegally open the knife protection door in the working state, the machine will automatically stop working. Now, let's talk about the large-scale vegetable cutter manufacturer.
傳送帶清理：
Belt cleaning:
任何機器和設備，都會面臨清洗和清理這個環節，以切菜機為例，普通款切菜機的傳送帶，主要作用在于葉莖蔬菜傳送，在批量加工投產過程中，肯定會出現傳送帶邊緣及底部有殘留，但是這款多功能切菜機是不具備快速拆裝和清洗功能，所以只能使用毛刷清掃，主要原因在于，機器硬件和線路設計沒有做到分離。
Any machine and equipment will face the process of cleaning and cleaning. Take the vegetable cutting machine as an example. The conveyor belt of the ordinary vegetable cutting machine is mainly used to transport leafy vegetables. In the process of batch processing and production, there will certainly be residues at the edge and bottom of the conveyor belt. However, this multi-functional vegetable cutting machine does not have the function of rapid disassembly and cleaning, so it can only be cleaned with a brush. The main reason is that, The machine hardware and circuit design are not separated.
機器防水等級：
Machine waterproof grade:
由于傳送帶葉莖設計結構問題，自然會出現機器防水等級的降低，無論任何機器都會出現連貫性反應，某個地方的設計缺陷，就會影響后半工序，雖然防水等級降低了，如果小批量的加工投產，基本上是不受影響，小編給使用著普通切菜機人一個建議，使用完以后，一定要及時清洗，而且清理盡量要干凈，切記傳送帶部位。
Due to the structural design problem of the conveyor belt leaf stem, the waterproof level of the machine will naturally be reduced, and any machine will have a consistent response. The design defect in a certain place will affect the second half of the process. Although the waterproof level is reduced, if a small batch of processing is put into production, it is basically not affected. Xiao Bian gives a suggestion to the person using the ordinary vegetable cutter. After use, it must be cleaned in time, And the cleaning should be as clean as possible, remember the conveyor belt.
竟然是設計缺陷導致，但是在使用上做好維護，還是可以使用，所以小編切菜機在此基礎上，研制一款智能切菜機設備，這款機器無論是在結構上，還是操控上，都得到很好的提升，切菜機采用數控可視化操控系統，只需通過屏幕一鍵設置，即可完成切割大小。
It was actually caused by a design defect, but it can still be used after maintenance. Therefore, based on this, the small plaited vegetable cutting machine has developed an intelligent vegetable cutting machine. This machine has been greatly improved both in structure and in operation. The vegetable cutting machine uses a numerical control visual control system, and it can complete the cutting size by one key setting on the screen.
In terms of waterproof level, it is also highly improved. After use, it can be directly cleaned with a water gun. Any machine can only solve the problem if it finds a problem. More relevant content will come to our website http://www.haohapi.com Ask about it.
